How To Outsmart Your Boss Wood Burner Fireplace

How to Get the Most From a Wood Burner Fireplace

Wood stoves, in contrast to traditional open fireplaces, are engineered to use wood for combustion. This enables them to comply with stricter emission standards.

Wood burning stoves produce glowing yellow flames that dance and warm crackling sounds. They also give you a primal feeling of warmth. However the smoke they release contains carbon monoxide and toxic air pollutants, such as formaldehyde, benzene and polycyclic aromatic hydrocarbons.

Efficient

Fireplaces and stoves that burn wood provide a beautiful and natural heat to your home, they are also incredibly efficient. A good quality wood burner can achieve an Ecodesign rating as high as 77 percent. With rising energy costs it is crucial to make sure you’re getting the maximum benefit from your log burner – the good news is that it’s much easier than ever before!

One of the most important factors in the efficiency of a wood burning stove is in the moisture content of the firewood. We recommend using only seasoned wood that has been dried for at least one year, and often two years. The dryer the wood is, the more efficiently it burns which results in less smoke and less harmful emissions.

A wood burning stove offers the advantage of being a low-carbon fuel source, which is good for the environment. By purchasing locally sourced wood, you also help to support the active conservation and management of forests. This is beneficial for wildlife.

In terms of maintenance concerned, the primary requirement for a wood burner is to frequently scoop up and dispose of the ash. This can be a little bit of a nuisance, but it is worth it to ensure you get the most heat from every log. If you wait for the ashes to cool completely They can also be used as a non-toxic, green melting ice. They can be used to polish jewelry and absorb smells.

A fireplace made of wood is a timeless classic. Although they’re less well-known than gas fireplaces, the allure and ambiance of a fire that is roaring can’t be disregarded. These fires are great for snuggling in on cold winter nights, and they create a warm and welcoming space in your home. Investing in a high-quality wood burner will pay off for a long time. Our expert chimney sweeps are available to assist you in getting the most out of your stove – give us a call today to learn more.

Low Carbon

Burners that burn clean and efficiently are among the best ways to save money on logs while keeping your home warm. Additionally, they also aid in local woodland management, a excellent way to help the wildlife in your area.

Wood-burning fireplaces and stoves create very little pollution if they are maintained properly and are used with dry, seasoned and dry firewood. However, if they are not well maintained or used with poor quality wood, the smoke produced by them is contaminated with fine particles (known as particulate pollution) that can cause irritation to the lungs and other organs. It also contains carbon monoxide as well as toxic air pollutants like benzene, formaldehyde and polycyclic aromatic hydrocarbons. Inhaling air pollution can cause irritation to the lungs and lead to asthma attacks wheezing, coughing, and irritation of the lungs. It can also lead to cancer, heart disease or premature death.

Some people fear that using a wood-burning stove can cause climate change, but this is not necessarily true. Burning wood is a carbon neutral energy source. Through the life of a tree, it absorbs carbon dioxide, and when burned the absorbed carbon is released back into the atmosphere.

The wood is local, which decreases the amount of pollution produced during the transport process. It is important to use hardwoods that have been seasoned and of high quality. They burn longer and more evenly than softwoods.

Modern wood stoves, including the ones made by Charlton & Jenrick, emit less carbon dioxide than older stoves. They are certified to meet 2020 EPA standards, which are considerably stricter than earlier emission limits.

All wood burning stoves must be fully vented to the outside of your home to ensure they do not create a haze of exhaust within your home. By keeping the flames in the vicinity of the logs and making sure you make use of dry, seasoned wood and all our clean burn and DEFRA exempt stoves can produce very clear exhaust and have particulate levels 60 or more lower than the DEFRA limit.

A wood-burning stove that has a catalytic converter could be the most efficient low carbon solution for heating. These units re-ignite gasses and particles that were ignited during the initial combustion in a subsequent phase by mixing them superheated air. The remaining gases and particulates are transferred to a catalytic unit to create a final and third combustion. This reduces emissions to levels far below the standards set by the government.

Clean Burn

Cleanburn wood stoves burn fuel with the highest efficiency possible. This results in the emission of very small particles into air when burning wood. The air management system of the stove regulates the intake and venting of gases to ensure that the combustion process occurs in a sealed and controlled environment. It also regulates the flame’s height to maximise the output of heat and reduce emissions.

This means your chimney and the surrounding area will be much cleaner than older stoves. Particulate matter, also referred to as particle pollution, is a result of wood that is not properly burned can cause respiratory problems, such as coughing and wheezing. It can also contribute to heart disease and stroke, diabetes and other serious conditions. The air pollution resulting from wood burning is also an important factor in poor urban air quality.

The smoke that is emitted from poorly combusted wood contains fine particulate pollution and hazardous air pollutants, including carbon monoxide volatile organic compounds nitrogen oxides, benzene, formaldehyde, and polycyclic aromatic hydrocarbons. These particles can get into the organs of the lungs which can cause discomfort, damage and even death. Airborne dust can also contaminate the surfaces of your home and give a gritty feel to rooms.

It is important to select good quality, seasoned and dried firewood for your wood burner fireplace. The most valuable woods for heating are hardwoods such as beech, oak and ash. Hardwoods are dense and have a higher BTU content than softwoods. They also have more heat.

You should also determine if your local authority has rules regarding wood burning. These could include nuisance/odor regulations and visible emissions, or smoke opacity limits.

It is essential to keep the glass of a wood stove with glass fronts free of dirt and deposits. You can use a dry towel or oven cleaner spray to accomplish this. You can also add bicarbonate of soda mixed with a bit of water to the glass.

Regular maintenance is crucial for your chimney and stove. Regular chimney cleanings are required to eliminate creosote, and ensure that the flue works correctly. It is also important to mark the dates of periodic inspections on your calendar. This will help you to avoid costly repairs and extend the life of your wood burner.

Low Maintenance

Many people prefer installing wood burning fireplaces due to the warmth and natural beauty they provide. However, this type of fire requires some upkeep and maintenance. The chimney, flue, and stove can all be the cause of house fires if not cleaned and maintained regularly. Fireplaces can also provide heat in the event of a power outage, particularly during winter storms when branches of trees may fall and power lines may be damaged.

Utilizing a wood burner to heat your home can reduce your carbon footprint considerably compared to other fossil fuel sources like gas. Modern wood stoves, inserts and fireplaces are built to conform to EPA standards (Environmental Protection Agency), which means they emit very little carbon dioxide. The more well-seasoned wood you use the more efficient the stove will be. You’ll require less wood to generate the same heat.

These fireplaces require some upkeep and attention, such as ensuring they are positioned away from the ignition source and that a screen is in place. The flow of air will be improved by keeping the grate clear of ash and debris. This will keep the fire burning longer and your home tidy. You should have your stove and chimney cleaned at least twice per year to avoid creosote accumulation which could create an extremely dangerous fire hazard as well as a blockage that can hinder the flow of air.

A wood-burning stove will need to be kept in good order and it may take time for a novice homeowner to understand how to light, ignite, and maintain a steady fire in the fireplace. Once you’ve mastered the art, your wood burner will be a source for warmth and comfort in your home.

Wood burning fireplaces have been around in some form or another for over 500 years. They’ve gained a lot of attention due to their efficiency, sustainability and the natural warmth of wood. If you’re thinking of buying a new heater, talk with your local certified Regency dealer to learn more about the benefits of an insert or stove made of wood for your home.